I installed a Digi CM console server tod ... / 2010-11-18

2010-11-18 I installed a Digi CM console server tod ...
Attention: this item is more than 5 years old, links can be broken and information can have been updated.
I installed a Digi CM console server today and the initial setup has two approaches:
From the CD, run the Advance Device Discovery Protocol application to locate the Digi CM on the network. In firmware 1.8 and greater, the CM has SNMP, SSHv1, and Telnet to the command line disabled by default, and http is automatically redirected to https. To perform initial device configuration, use the discovery tool on the CD
or ..
Are you a POWER USER? Use the configuration menu: 1. Establish a serial connection through the console port (9600, 8, N, 1). 2. Login as root and password dbps. 3. Type the command configmenu. Select option 1 - Network Configuration and follow the prompts.
Hardware with the bofh nature. I like it.

Tags: , ,

IPv6 check

Running test...
, reachable as koos+website@idefix.net. PGP encrypted e-mail preferred. PGP key 5BA9 368B E6F3 34E4 local copy PGP key 5BA9 368B E6F3 34E4 via keyservers

Meningen zijn die van mezelf, wat ik schrijf is beschermd door auteursrecht. Sommige publicaties bevatten een expliciete vermelding dat ze ongevraagd gedeeld mogen worden.
My opinions are my own, what I write is protected by copyrights. Some publications contain an explicit license statement which allows sharing without asking permission.
Other webprojects: Camp Wireless, wireless Internet access at campsites
This page generated by $Id: newsitem.cgi,v 1.62 2023/09/19 14:49:50 koos Exp $ in 0.008910 seconds.