2019-12-27 First radio contacts with the radio and antenna setup at a remote location 3 months ago
The main unit of the Kenwood TS-480SAT radio is now at a different location and the frontpanel is at home. With an OpenVPN connection between them so it's not exposed to the big bad internet. And it's working! I currently have access to a 10/15/17/20 meter antenna and I have already heard stations I wouldn't dream of receiving at home. And the first country in SSB in the log that I only had in digital modes before: Ceuta and Melilla, the Spain enclaves in Africa. Lag is minimal, audio is less delayed than listening to the utwente websdr to the same signal. Control works fine, so I can control the radio like I'm sitting behind it, including menu settings. Comparing received signals on the local radio with the attic dipole and the remote radio is hell and heaven: local noise is S9+ and the remote location has almost no local noise (while still being in an urban environment) so I can hear even weak stations fine. I leave the noise blanker off most of the time because it's not needed to hear signals fine. Not making loads and loads of contacts yet, propagation isn't cooperating very well and there aren't many people calling CQ. But when a somewhat special station calls CQ there are a lot of answers so there are numerous amateurs active. Or I guess they go to their set when they see an interesting callsign on the DX-cluster. I also got morse keying by paddle working beforehand. Hearing the sidetone from the radio with just a bit of lag got annoying fast when doing morse at a bit of speed so the sidetone is now from the control unit and the sidetone in the radio is silent. It's still set to the same audio frequency as the sidetone in the control unit to allow for finding the zero beat frequency.