An update to the home 1-wire network / 2020-09-02

2020-09-02 An update to the home 1-wire network 7 months ago
For more than 12 years now(!) the house has temperature sensors using the 1-wire protocol. I recently redid some of the wiring between floors and I finally got around to rerouting the 1-wire network via this new route.

I also added a temperature sensor in the big room in the attic, we are thinking of using that room more often. To get an idea of how good that idea is we wanted to get an idea of the temperatures up there and that's what I have 1-wire sensors for! I soldered an 18b20 sensor to the end of a 4-wire flat phone cable, added it to the network and it's measuring.

So now 12 environmental temperatures are measured every 5 minutes: 9 in the house, one in the weather hut, one in the shed and one on the roof of the shed.

I also updated the 1-wire projects overview with how I use 4-wire flat phone cable in RJ45 connectors for 1-wire network. I had to look up how I did that previously before I could start adding new cables!

Tags: , , ,

IPv6 check

Running test...
, reachable as koos+website@idefix.net. PGP encrypted e-mail preferred. PGP key 5BA9 368B E6F3 34E4 local copy PGP key 5BA9 368B E6F3 34E4 via keyservers

RSS
Meningen zijn die van mezelf, wat ik schrijf is beschermd door auteursrecht. Sommige publicaties bevatten een expliciete vermelding dat ze ongevraagd gedeeld mogen worden.
My opinions are my own, what I write is protected by copyrights. Some publications contain an explicit license statement which allows sharing without asking permission.
Other webprojects: Camp Wireless, wireless Internet access at campsites, The Virtual Bookcase, book reviews
This page generated by $Id: newsitem.cgi,v 1.54 2020/12/31 15:36:31 koos Exp $ in 0.005744 seconds.