2021-01-13 Fiber to the shed 4 months ago
There is no fiber to our home in the near future but I am working on laying another fiber route: from the switch in the cupboard downstairs to the shed. This is because the NTP server in the shed still has intermittent connectivity issues when using 2.4 GHz wifi due to the 2.4 GHz wifi channels being very crowded. The wifi dongle has no 5 GHz support and I don't think I would get it very reliable. But other options are also not ideal. As a radio amateur I can't go back to using powerline (network over power cables) and I wouldn't feel safe with a network cable running that far should a lightning strike ever occur. I should write "occur again" since I have had a network switch with probable lightning damage before. The only option left is what you guessed from the title of this post: fiberoptic cable. No interference to my radio reception and a lot less chance of lightning blowing up parts of the network and connected computers. But a whole new world of fiber types, fiber lengths, wavelengths, connector types and interface types opened up to me. The switch in the cupboard downstairs has SFP ports, but how to get beyond that. The raspberry Pi 3B+ that I use is 100 mbit only and I wasn't sure how to handle that. So I asked someone who is very good with fiber networks to explain to me what options are available and that person dug up some lengths of fiber that are no longer used and some 100 mbit fiberoptic transverters that were also a wrong purchase. So I already have the connectivity hardware available. Now all I need is a physical route between the shed and the rest of the network. There is an old plastic pipe from the shed to the crawlspace of our house that was once used for heating will probably do the trick once I figure out how to remove the old heating pipes from it. I guess there is some real dirty work below the floor of our house and in the shed in my near future. I will also need to buy plastic tubing to safely guide the vulnerable fiber. And some hooks to hang this tube and other cables from the floor instead of having them lie in the sand in the crawlspace. Since there is also an old gas pipe in the plastic pipe I will make really really sure first that one isn't connected somewhere. This was all triggered by adding the ntp server in the shed to the NTP pool and having the pool monitoring system gripe about the server becoming unreachable as soon as I have wifi problems. The things I will do for serving the right time!