The NTP ham clock is ticking / 2021-04-07

2021-04-07 The NTP ham clock is ticking
esp32 based NTP ham clock on breadboard Recently the parts for the NTP ham clock I saw in the Electron magazine arrived: an ESP32 module and a TFT display. It took a bit before I had time to actually do something with them but recently I put the modules on breadboard and started making the needed connections. There are not a lot of those, only 8 wires need to be connected between the ESP32 microcontroller and the TFT display.

After some fiddling it worked and I managed to program it all with the settings I like, such as the right timezone rules for the Netherlands, 24 hour display on both clocks and it fetches the NTP time from the NTP server in the shed so it doesn't rely on outside connectivity.

Now to find a case for it and wire it neatly.

Tags: , , ,

IPv6 check

Running test...
, reachable as koos+website@idefix.net. PGP encrypted e-mail preferred. PGP key 5BA9 368B E6F3 34E4 local copy PGP key 5BA9 368B E6F3 34E4 via keyservers

RSS
Meningen zijn die van mezelf, wat ik schrijf is beschermd door auteursrecht. Sommige publicaties bevatten een expliciete vermelding dat ze ongevraagd gedeeld mogen worden.
My opinions are my own, what I write is protected by copyrights. Some publications contain an explicit license statement which allows sharing without asking permission.
Other webprojects: Camp Wireless, wireless Internet access at campsites, The Virtual Bookcase, book reviews
This page generated by $Id: newsitem.cgi,v 1.55 2021/11/09 13:09:49 koos Exp $ in 0.005946 seconds.