Upgrading the fiber to the shed network / 2022-02-08

2022-02-08 Upgrading the fiber to the shed network
The current fiber to the shed network is working fine but only gives the Raspberry Pi based NTP server network at a speed of 100 mbit.

The link is working fine but the next device with network problems due to unreliable wifi is showing up: the solarpanel inverter in the shed is sometimes unreachable for my solar inverter monitoring using modbus/tcp and that means I 'miss' measurements. The propetairy monitoring that solaredge does can deal with interruptions in reachability and upload older data, but the modbus/tcp monitoring I use can only access real-time data.

My first plan was to look at industrial switches because of the extended temperature and humidity ranges in the shed. But having both 'industrial' and 'sfp slot' costs a lot of money.

My next thought is to put all the possibly sensitive electronics in one case and hope the temperature and humidity inside that case stay within a reasonable range. This thought is based on the fact that the Raspberry Pi based NTP server functions fine in a not very closed wooden box without being affected by temperature or humidity.

Tags: , ,

IPv6 check

Running test...
, reachable as koos+website@idefix.net. PGP encrypted e-mail preferred. PGP key 5BA9 368B E6F3 34E4 local copy PGP key 5BA9 368B E6F3 34E4 via keyservers

RSS
Meningen zijn die van mezelf, wat ik schrijf is beschermd door auteursrecht. Sommige publicaties bevatten een expliciete vermelding dat ze ongevraagd gedeeld mogen worden.
My opinions are my own, what I write is protected by copyrights. Some publications contain an explicit license statement which allows sharing without asking permission.
Other webprojects: Camp Wireless, wireless Internet access at campsites, The Virtual Bookcase, book reviews
This page generated by $Id: newsitem.cgi,v 1.57 2022/02/15 21:48:18 koos Exp $ in 0.006901 seconds.