2018-06-30 New 2 meter distance: 483 kilometers 2 years ago
While trying to get an idea of how much interference I have on the 2 meter band I still worked on my distance records: I had a contact with G8GXP which is a distance of 483 kilometers, a new record for me on the 2 meter band. This is with S5/S6 interference on the 2 meter band as long as the sun is more than a bit above the horizon, which at the moment is very long. Some ferrite added to the solar power convertor already helped, but I guess the solar optimizers also need some work to clear the 2 meter band again.
2018-06-27 Recorded the ISS contact today 2 years ago
Today was an ISS contact with Werner-Heisenberg-Gymnasium, Leverkusen, Germany and Schickhardt-Gymnasium, Herrenberg, Germany and most of the contact was going to be within range for me and it was at a usable time. So I set up gpredict to track the ISS and the receive frequency and set up audacity to record the results. Which weren't great since 2 meter reception is now influenced by recently installed solar panels on the house next door.
Listen to audio attachment:
2018-04-08 I participated in the EA RTTY Contest 2018 3 years ago
As planned I participated in the EA RTTY Contest edition 2018. I had most of the time to play radio on Sunday so I decided to participate in the SO20DX (single operator 20 meter band outside Spain) category. I did make two contacts on the 40 meter band when I thought I wasn't going to find any new station the 20 meter band but I returned. And found more stations on the 20 meter band.Read the rest of I participated in the EA RTTY Contest 2018
2018-03-04 Trying a bit of radio at a holiday park 3 years ago
Last week we were staying in a holiday home in the Ardennen area in Belgium. Temperatures were constantly below zero which can make my fibermast break easily according to the instructions. I also forgot to bring a side cutter so setting up the fibermast with the rubber profile at every level would be hard to take down again. This made it a bad idea to leave it up overnight. Due to the cold and me having a serious cold as well it took a few days before I got around to a bit of amateur radio. When I got around to setting up the mast it went reasonably well. The ground was frozen so I needed a hammer to get the pegs into the ground for the guy wires. The foot of the fibermast decided to slip away and the tip fell against a wall, but no damage. When the mast was up and the dipole hanging the local RF noise turned to be at the same S8 level I am used to at home and it was very hard to make a contact. I tried 40 meter FT8 with transmit power dialed back to 25 watt since the radio itself started showing signs of RF interference. One partial contact was made (no full exchange of signal reports). And then I noticed gardeners working on pruning bushes everywhere and working in my direction so I disassembled the mast again and took all the parts back in. For next time I may find some plate to anchor the foot of the fibermast so it can't slip away. Maybe a plate with a big hole in it for the mast and two small holes for tent pegs.
2018-01-15 I participated in the UBA PSK63 prefix contest 3 years ago
As planned I participated in the UBA PSK63 prefix contest in the weekend. Activity was Saturday evening and Sunday morning interrupted by some good sleep. Compared to my experiences in the ARRL RTTY roundup one weekend earlier the 40 meter band decided to act quite differently. On Saturday evening it was quite hard to make a contact. A lot of interference, no far away stations and it was hard to get heard by the other side. I stopped before 22:00 UTC (23:00 localtime) because I thought some sleep would be more effective than getting annoyed by the lack of contacts. Indeed, Sunday morning things got better although I heard only nearby signals on the 40 meter band, including some Belgian stations. No serious DX. Belgian stations are good for extra multipliers so it was good for the score. In the end I made 76 contacts. The last contact was started by a CQ I called at 11:59 UTC but it was only answered at 12:00, so it does count but I had to note it in the log as originating at 11:59 where the software normally logs the moment I see the callsign for the first time. Log submitted and de Veron afdelingscompetitie updated.Read the rest of I participated in the UBA PSK63 prefix contest
2018-01-08 I participated in the ARRL RTTY Roundup 2018 3 years ago
For the past weekend I had the ARRL RTTY Roundup planned, meaning I had reserved time in the family calendar. Other things had to happen too but I reserved time for contesting and made sure I had the right macros available before the contest started. I hoped to find time to set up the endfed antenna before the contest but that did not happen so it was the first thing to do when we got home at the beginning of Saturday evening. In the contest I only operated on the 40 meter band. Most of the time I was able to participate were in the dark when I did not expect the 20 meter band to cooperate and I thought that operating in just one band would make me end higher in the rankings for that more specific category. Only after the contest I read the rules exactly and noticed that this specific contest does not differentiate between single and multi band operation. In the end I made 95 contacts. Local noise is high in my current setup so only the strongest stations came through the noise. I made only one contact in CQ mode, the rest was search and pounce. Propagation wasn't really good until late in the evenings when I managed to score some US contacts. I did see someone from Prince Edwards Island in Canada but that station did not hear me return. I noticed WP2B did not give me a US state but a serial number and found out that is a US Virgin Island callsign, so that was a new country for me. In the end a nice contest. For upcoming contests: check the rules / propagation predictions and plan my strategy.Read the rest of I participated in the ARRL RTTY Roundup 2018
2017-11-25 Portable operation close to my home 3 years ago
Today I had some time left and the choice was between staying at home and throwing out the endfed and making a lot of contacts in digital modes or going out and trying a nearby park and making a lot less contacts but learning about my options there. I chose the latter one: I loaded my gear in the bicycle trailer and cycled to a nearby park, just outside the city limits of Utrecht. I took the fiber mast and used two elastic straps to tie it to a parkbench. The effect was that the mast was slanted but using it with the wire of the endfed twisted around it the fiber mast stayed up fine without needing its guy wires. And I forgot to bring the tent pegs anyway so I was unable to guy the mast. I tried the endfed as a vertical with some slack at the bottom and the transformer at the bottom. This gave me a horrible standing wave ratio on 40 and 20 meters. I guess the endfed is only balanced when it is stretched. The quick fix was to add a common-mode choke in the coax to the radio. I also added a counterpoise wire to the earth of the endfed to be somewhat balanced again. On the 40 meter band reception was ok but I could not understand a lot of stations. On the 20 meter band there was local interference. In the end I logged one whole contact on the 40 meter band with an Italian special event station. He gave me a 4-4 report and I gave him a 5-9+. After a few tries I gave up making him log me as /portable so I logged it in my PE4KH log. The location is still within JO22NC so I logged in my home log. As soon as the sun set it started cooling down and the grass got wet and I went home. It's a nice location and quite reachable from home. It's 10 minutes cycling and in 10 minutes I had the mast and the radio set up.
2017-09-08 I built a common mode choke 3 years ago
After the problems with the laptop controlling the radio when I participated in the SCC RTTY contest 2017 I decided to build a common mode choke. This is a filter that should keep the radio frequency signals at the side of the antenna. Based on the simple design with a piece of PVC pipe with 8 windings of Aircell-7 coax I still had lying around. The PVC pipe was donated by a fellow radio amateur who had it in his junkbox. I drew a pencil line on the pipe, decided where to drill holes for the coax cable (using a 16 millimeter drill) and where to drill holes for tiewraps to hold the coax. After drilling the holes it was a matter of winding the coax correctly, mounting the cable with tiewraps and soldering the connectors to the cable. In the first testing the filter worked fine, completely stopping the interference to the keyboard of my "shack computer" and even reducing incoming noise on the 10 meter band.
2017-08-28 I participated in the SCC RTTY 2017 contest from the radioclub location 3 years ago
Again this year had the SCC RTTY contest in the same weekend as the barbeque of the radio club so the solution was to work in the contest from the location of the radio club. I set up with the endfed antenna in the available field. That field is close to some houses so I had some interference. And the main problem was that the computer control between the laptop running fldigi (the contest logging software) and the radio regularly gave problems, usually leaving the radio in transmit mode. The laptop and the computer interface aren't shielded very well which is probably a reason, combined with the use of the endfed antenna which is known for causing interference since it's an asymmetric antenna. In the end I made 53 contacts. Less than the number of contacts in previous SCC RTTY contest but I had limited time and local noise was higher than I expected. For a next time I am working on a common mode choke to limit interference to the computer and maybe some noise. And probably next time I contest at the radio club I will try to use a different antenna location.Read the rest of I participated in the SCC RTTY 2017 contest from the radioclub location
2017-04-24 Somewhat less HF interference by moving the antenna away 3 years agoItems with tag interference before 2017-04-24
I was testing with noise on all radio bands with the LW-10 longwire antenna with tuner. I recently made the rope that hangs it out from the window a bit longer and I noticed the noise on the 10 meter amateur radio band had dropped a lot compared to the noise I experienced before and the noise on the antenna under our roof. In S-points: under the roof S8, with the 10/20/40m endfed S8, and with the longwire antenna S0. On bands with lower frequencies (higher wavelengths) noiselevels were high, up to S9+ on 80m with a rattling noise in it. But this sudden change on the 10 meter band made me think there could be a pattern so I measured how much more distance I could move the antenna away from the house and maybe get lower noise levels on the 20m band too. After adding 1.60 meter of rope and rehanging the antenna the noise level on the 20 meter band also dropped from S8 to S7. Not the biggest improvement but it's something. I'm now making some PSK qso's on the 20 meter band. At the S8 noise level this was getting impossible.